Van điện từ Kaneko M15G-8-DE12PU DC24V

Van điện từ Kaneko M15G-8-DE12PU DC24V được nghiên cứu và sản xuất bởi hãng Kaneko Nhật Bản

Thông số kỹ thuật chung của dòng van điện từ Model M15G Kaneko

Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abrasion resistance in operation can not operate even without lubrication.

The main parts are made of aluminum alloy, has become very small and light.

You can be easily replaced AC, DC coil is designed so that both fit into the same casing.

Corrosion treatment has been applied in a very strong hard anodized corrosion resistant.

Flameproof is a test of the Ministry of acceptable product.

Main valve is not malfunction due to spring for actuation by a piston, without the need for a spring, also be left for a long period of time and therefore will operate 換作 off balance spool type.

With buttons for manual, you can check or test operation.

Minimum operating pressure is 0.1MPa operate reliably in because there is no Earosu.

You can also be used as a three-way valve to select the port in the form of port 5.

FLUID TEMPERATURE-20 ～ 60℃

AMBIENT TEMPERATURE-20 ～ 60℃

DUTY CYCLE100%

CONTINUOUSLY RATEDOPERATING VOLTAGE RANGE+10，-15％

WORKING PRESSURE0.1 ～ 0.99MPa

Cv. FLOW FACTOR0.87S

M15G-8～10 GENERAL PURPOSE TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	123
10	60	123

M15G-8～10 EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	138
10	60	138

M15G-8～10 HYDROGEN EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	156
10	60	156

M15G-8～10 DUST EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	190
10	60	190

quý khách có nhu cầu báo giá, vui lòng liên hệ Tùng 0932 764 899 (Zalo)